• O CLIP HOSE CLAMP PINCER PLIERS NIPPERS

    • Quality made ‘O’ Clip pliers with insulated handles
    • Provides a professional crimped finish
    • 220mm long
  • OETIKER STEPLESS O CLIP CLAMP 7.8 – 9.5MM – SMALLER POLE HOSE SIZE

    • Suitable for use with any combination of Gardiner 5mm barbed fittings & the Gardiner PVC or PU pole hoses, particularly where a tighter fit is needed (not suitable for use with reinforced pole hose)
    • This O clamp can be used to clamp down on hose with barb fitting inserted.
    • To check suitability for use with other fittings/hoses – measure the OD of the hose with the barb inserted – if it is between 7.8 and 9.5mm then this fitting is suitable to be used
    • To operate the clamp use a pair of O Clip Pincers to squeeze the side of the single ear together at the narrow point
  • OETIKER STEPLESS O CLIP CLAMP 8.3 – 10MM – POLE HOSE SIZE

    • Suitable for use with any combination of Gardiner 5mm barbed fittings & any of the Gardiner PVC or PU pole hoses
    • This O clamp can be used to clamp down on hose with barb fitting inserted.
    • To check suitability for use with other fittings/hoses – measure the OD of the hose with the barb inserted – if it is between 8.3 and 10.00mm then this fitting is suitable to be used
    • To operate the clamp use a pair of O Clip Pincers to squeeze the side of the single ear together at the narrow point
  • OETIKER STEPLESS O CLIP CLAMP 9.0 – 10.5MM – POLE HOSE WITH 6MM BARB FITTINGS

    • Suitable for use with any combination of 6mm barbed fittings & any of the Gardiner PVC or PU pole hoses
    • Also suitable for use with the Flexible Reinforced PVC Pole Hose with 5mm barb fittings
    • This O clamp can be used to clamp down on hose with barb fitting inserted.
    • To check suitability for use with other fittings/hoses – measure the OD of the hose with the barb inserted – if it is between 8.8 and 10.5mm then this fitting is suitable to be used
    • To operate the clamp use a pair of O Clip Pincers to squeeze the side of the single ear together at the narrow point
  • OETIKER STEPLESS O CLIP HOSE CLAMP 10.3 – 12.8MM – MICROBORE

    • Suitable for use with MIcrobore Hose and 6mm Barb Fittings
    • This O clamp can be used to clamp down on hose with barb fitting inserted.
    • To check suitability for use with other fittings/hoses – measure the OD of the hose with the barb inserted – if it is between 10.3 and 12.8mm then this fitting is suitable to be used
    • To operate the clamp use a pair of O Clip Pincers to squeeze the side of the single ear together at the narrow point
  • OETIKER STEPLESS O CLIP HOSE CLAMP 12.3 – 14.8MM – MINIBORE

    • Suitable for use with MInibore Hose and 8mm Barb Fittings
    • This O clamp can be used to clamp down on hose with barb fitting inserted.
    • To check suitability for use with other fittings/hoses – measure the OD of the hose with the barb inserted – if it is between 12.3 and 14.8mm then this fitting is suitable to be used
    • To operate the clamp use a pair of O Clip Pincers to squeeze the side of the single ear together at the narrow point
  • STAINLESS STEEL JUBILEE CLIP TYPE HOSE CLAMP 8MM – 12MM

    • Stainless Steel Screw Drive Jubilee Clips type Hose Clamps
    • 8 – 12mm, for use on Pole Hose, Microbore Hose & Backpack hose
Call Now Button
error: Content is protected !!